High Reflecting Speedway Markings Thermoplastic Road Paint
|Gravity, g/m3||2.1 g/m3|
|Color||Yellow, Orange, Red and etc|
|Softening Point, ℃||110 ℃|
|Coating Appearance||No wrinkles, dots, blisters, cracks, fall-out & stick tyres|
|Drying Time, min||Within 3 minutes|
|Chroma Performance||Reverse material (white)|
|Compressive Strength, MPa||26|
|Abrasive Resistance, mg||42|
|Water Resistance||Great(in water for 24 hours)|
|Alkali Resistance||Great(in saturated solution of calcium hydroxide for 24 hours)|
|Glass Beads, %||19%|
|Coating Resisitance||Resist -10℃ for 4 hours|
|Heat Resistance||Under 200℃-220℃ for 4 hours|
|Material||C5 Petroleum Resin, CaCO3, Wax, Glass Beads, EVA, PE and so on.|
|Package||25kg/bag, by plastic woven bag. One 20’ container can load Max. 25 tons.|
1) Higher adhesive strength: Special elastomer is added in our recipe of thermoplastic road marking paint in order to improve the adhesive strength
2) Stronger crack resistance: Our recipe compounded a special additive which is seasoned with the temperature. Thus it avoids possible deformation of the melted film caused by nature temperature variation.
3) Bright color: Our recipe introduced high quality color filler with reasonable mixture proportion. And it helps thermoplastic paint lasts for years without color change.
4) Enhanced wet night visibility
5) Immediate retroreflectivity
Rroad marking, straight line, dotted line, curve, oriented arrow, letter and etc.
Parking lot, community, expressway, urban road, park runway, stadium, bridge, tunnel